purification of brewery waste water
practical conditions
The waste water of a brewery is treated in a company owned treatment plant. Because of increasing production and increasing waste water, it was necessary to enlarge the treatment plant.
To safe costs, not the whole treatment plant was enlarged, only the efficiency of the single process steps should be increased.
picture 1: LEIBLEIN lamella separator
function specifications:
The solution was the installation of a Leiblein-lamella separator after the primary treatment. The lamella separator separates the majority of the sludge. The sludge is pumped back to the primary treatment.
technical data:
| waste water inlet before increasing production | : about 2100 m³/d |
| waste water inlet after increasing production | : about 2450 m³/d |
inlet primary treatment: |
|
| inlet flow rate | : about 2450 m³/d |
| sludge inlet | : 1100 kg/d |
| sludge content | : 0.4% ds |
inlet lamella separator: |
|
| inlet flow rate | : about 2410 m³/d |
| sludge inlet | : 5800 kg/d |
clear water outlet lamella separator: |
|
| flow rate | : about 2230 m³/d |
| sludge outlet | : 1220 kg/d |
sludge outlet lamella separator: |
|
| flow rate | : 185 m³/d |
| sludge | : 6200 kg/d |
| sludge content | : 3.5 - 6 % |
sedimentation area lamella separator |
: 130 m² |
| lamella distance | : 80 mm |
| angle of inclination | : 60° |
| material casing / lamellas | : coated steel / polypropylene |
| gradient of sludge separation | : 60 - 90 % (ø 70 %) |
| purification capacity | : 0.8 m³/m²*h |
Click here or the flow sheet for an enlarged view!
back to 'referenes process water'
All in all:
purification of effluents - an optimal solution!
For more informations please contact us:
| Leiblein GmbH · Adolf-Seeber-Str. 2 · 74736 Hardheim · Germany · | Phone: | +49 (0) 6283 - 2220 0 |
| Fax: | +49 (0) 6283 - 2220 50 | |
| E-Mail: | leiblein@leiblein.com | |
| Homepage: | http://www.leiblein.com |
